Timer in Conference Room 1E-113
Conference timer has been installed in conference room 1E-113 to assist boards & commissions with timing public comments.
Here are the steps to use the conference room timer:
1.On the Crestron panel where you start the “Room PC” tap on the Conf. Timer. You will notice that the projector will switch to the blue background with 03:00 on it. The screen on the “Crestron” should look like the image below.
2.To start the timer please press on “Start” on the Crestron panel. The timer will start counting down on the panel and on the projector screen.
3.To stop or pause the timer you can press “Stop” to pause it or stop it. To resume the timer press “Start”
4.After the speaker’s time has run out you will need to press “Reset Timer 3 Min.” to have timer reset back to 03:00 and you will have to press “Start” again for the next speaker.
5.Once the public comment has concluded, you will need to press on “Room PC” on the Crestron panel to go back to the view from the camera.
If you require further assistance, contact IT Support:
Support Portal: https://itsupport.bellevuewa.gov
Email: itsupport@bellevuewa.gov
Phone: 425-452-2886